CAS No.  26172-55-4, 2682-20-4            
					Molecular weight:  115.16 
					Structural Formula: 
					 
					
					
					2-methyl-4-thiazoline-3-ketone         
					5-chloro- methyl-4-thiazoline-3-ketone
					Properties:
					
					
					Isothiazolinones (CMIT/MIT) is composed 
					of 5-chloro-2-methyl-4-thiazoline-3-ketone (CMI) and 
					2-methyl-4-thiazoline-3-ketone (MI). The bactericidal effect 
					of 
					
					Isothiazolinones (CMIT/MIT) is carried out through breaking the 
					bond between bacteria and algae protein. When contacted with 
					microbes, 
					
					Isothiazolinones (CMIT/MIT) can quickly inhibit their growth, thus 
					leading to death of these microbes. 
					
					Isothiazolinones (CMIT/MIT) has strong 
					inhibition and biocidal effects on ordinary bacteria, fungi 
					and alga, and has many advantages such as high biocidal 
					efficiency, good degradation, no residual, safety in 
					operation, good compatibleness, good stabilization, low cost 
					in operation.
					
					
					
					Isothiazolinones (CMIT/MIT) can mix with 
					chlorine and most cation, anion, and non-ionic surfactants. 
					When used at high dosage, its biosludge stripping effect is 
					excellent. 
					 
					
					Isothiazolinones (CMIT/MIT) is a kind of 
					fungicidal with properties of broad spectrum, high 
					efficiency, low toxicity and non-oxidative, it is the ideal 
					biocidal in industrial circulating cool water system and in 
					wastewater treatment in oilfield, papermaking, pesticide, 
					cutting oil, leather, detergent and cosmetics etc..
					Specification:
					Notes: 2%, 4% and 8% or any concentration can be supplied 
					on demands.
					
						
							
								| Items | 
								Index | 
							
							
								| Grade 
								I | 
								Grade 
								II | 
							
							
								| Appearance | 
								Amber 
								transparent liquid | 
								Light 
								yellow or light green transparent liquid | 
							
							
								| Active content % | 
								14.0-15.0 | 
								2.0 min | 
							
							
								| pH (as it) | 
								
								2.0-4.0 | 
								
								2.0-5.0 | 
							
							
								| Density (20℃)g/cm3 | 
								1.24-1.32 | 
								1.03 min | 
							
							
								| CMI/MI (wt %) | 
								
								2.5-3.4 | 
								
								2.5-3.4 | 
							
						
					 
					Usage:
					When used as 
					sludge 
					stripper for grade II, the dosage of 150-300mg/L is 
					preferred, when used as boicide, the dosage of 80-100mg/L is 
					preferred, and charges every 3-7 days. No used together with 
					oxidative fungicidal such as chlorine, and no used in 
					cooling water system containing sulfur. When used together 
					with quaternary amine, the effect will be better. When used 
					as industrial fungicide, the dosage of 0.05-0.4% is 
					preferred.  
					Package and Storage:
					200L plastic drum, IBC(1000L), customers' requirement. Storage for ten months in shady room and dry place.
					Safety Protection:
					Corrosive, Avoid contact with eye and skin, 
					Wear splash resistant safety goggles and rubber glores.once 
					contacted, flush with water. 
					Synonyms:
						
						Isothiazolinones (CMIT/MIT);3(2H)-Isthiazolone,5-chloro-2-methyl;2-Methyl-3(2H)-Isothiazolone